SYNCHRO-SYM Technologies


Our Mission:



For Our Clean, Efficient, & Sustainable

Energy Future!

1)The Only Practical 3D Printer That Will Democratize The Just-in-Time Manufacture of Axial-Flux Electric Machines By Localizing Clean, Non-Smokestack Manufacturing At The OEM Facility, At The Boutique Manufacturer Facility, Or At The Research Facility;
(e.g., Portable and Scalable. Note: Compared to other forms of electric machines, such as radial flux electric machines, the axial-flux electric machine uses 10-20% less copper and steel while providing more efficiency and torque.)

2)The Only Practical 3D Printer of Axial-Flux Electric Machines With A Patented "Method" of 3D Printing;
(e.g., "Methods" protect the tool and the product manufactured with the tool and as a result, methods protect against unscrupulous countries and entities that effectively steal the tool IP by selling product manufactured with the tool. As a patented "method," which protects the manufacturing IP and the manufactured product using the IP, MOTORPRINTER will democratize manufacturing with distributed manufacturing, will eliminate the consolidation of electric machine manufacturing to slave labor countries, and will provide a leverage against unfair trade barriers or trade wars.)

3)The Only Practical 3D Printer of Axial-Flux Electric Machines That Uses Readily Available (or Off-The-Shelf Materials) With The Highest Electromagnetic and Structural Performance;
(e.g.,  Off-The-Shelf electric machine materials, such as amorphous metal ribbon, electrical steel, structural steel, etc., are pre-manufactured by third party foundries using the most optimized production methods under the lowest cost while providing the most optimized electromagnetic or structural performance. All other 3D Printers use materials that are specifically manufactured for optimum compatibility with the 3D Printer, instead of the electric machine performance. For instance, although discovered a half century ago, amorphous metal ribbon has ideal electromagnetic performance properties but its demanding structural properties (e.g., extreme hardness and thinness) have prevented electric machine manufacture until MOTORPRINTER)

4)The Only Practical 3D Printer of Axial-Flux Electric Machines Where The Low Material Waste Is Easily Reprocessed With Little Environmental Impact;
(e.g., All others 3D Printers have environmental and reprocessing issues with their resulting waste)

5)The Only Practical 3D Printer of Axial-Flux Electric Machines That Manufactures The High Frequency Transformer and Low Frequency Electric Machine Cores On To The Same 3D Printed Frame But With No Adaptation of The Electric Machine Form-Factor;
(e.g., This is at least convenient for SYNCHRO-SYM but also provides the additive manufacture of high frequency, high power transformers for the smart grid. Still in research, other potential providers of 3D Printing of electric machines are redesigning the electric machine form to adapt to their style of 3D Printing.)

6)The Only Practical 3D Printer of Axial-Flux Electric Machines With Straight-Forward-Ready Engineering And Fabrication;
(e.g., Empirical studies have been successfully performed with Metglas and IPGPhotonics. All other 3D Printers of electric machines are in an uncertain research and development phase)




Comments, Suggestions, or Collaborative Interest Welcomed!


[HOME]                   [Contact]


2007, 2009, 2014, 2018  Best Electric Machine